How do I configure a Wall Switch?
Once a Wall Switch has been added to the network, it must be connected to a target in order to control it, just like all the other control devices.
Connect a Wall Switch.
Quick setup
All switches can be connected via the 'Quick setup' shortcut. This process connects the device to a selected target and configures all buttons and gestures based on a unified default behaviour for all screens.
- Open the Wall Switch device screen.
- Press the 'Quick Setup' button at the bottom of the screen.
- Select the control target you want to connect to (room, group, or devices).
- Select the controllable unit and press 'Save'.
To make life easier, the buttons on the Wall Switch and their gestures are automatically configured based on a unified default behaviour. You can change the button assignments manually afterwards if you wish.
Manual configuration
Alternatively, select 'Customise' to configure all buttons and their gestures manually.
- Select the button you want to change from the interactive illustration.
- Select the gesture you want to configure.
- Select an action for the selected gesture.
- Repeat these steps for every button and gesture you want to assign.
- Leave the selection screen and press the 'Save' button.
Change the configuration
To change the button assignments, follow these steps:
- Select the button you want to change from the interactive illustration.
- Select the gesture you want to edit.
- Make your changes on the following screen and select a different action.
- Leave the selection screen and press the 'Save' button once you have updated all the buttons.
Remove connection
To remove a connection between a Wall Switch and a controlled target, follow these steps:
- Select the configured control target (e.g. Living Room).
- The 'Connection' menu will open, allowing you to change the target.
- Select 'Nothing' to disconnect from the current target.
If you want to reset all buttons, you have to repeat this for all buttons on the device.