How do I configure a Mesh Box?

After successfully adding a device to the Mesh network, some devices must first be configured. A good example of this is the Connect Mesh 6-way distributor (Mesh Box), to whose ports a variety of different lights, actuators and sensors can be connected.

Example configuration of a 6-way distributor Connect Mesh (Mesh Box)

Initially, all six actuator connections of the Mesh Box are unassigned. You can now press the available end devices one after the other. Each end device occupies a certain number of required connections. The respective cables must also be connected according to this assignment. If you have made a mistake, you can click on a connection at any time and delete the end device at this point with the ‘X’. You can use the ‘Repeat’ button at the top right to remove all assignments at once. After configuring the actuator connections, you can optionally configure sensors or EnOcean devices. If no sensor needs to be configured or an EnOcean device linked, simply continue with the configuration.