Remote Control

The Remote Control is a battery operated device that serves to control any Connect Mesh devices. It offers 6 selectable channels, each of which can control a separate group. In addition, there are 3 freely assignable scene buttons. This device supports the following functions:

1. On/Off
2. Temperature/Color
3. Brightness/Saturation

• Switch on/off (press middle button briefly: On, hold middle button: Off)
• Dim up/down (hold top or bottom button)
• Minimum brightness: Short press on lower button
• Maximum brightness: Short press on upper button
• Colour temperature up/down (Hold left button: Colour temperature down, Right button hold: Colour temperature up)
• Minimum Colour Temperature: Short Press on Left Button
• Maximum Colour Temperature: Short Press on Right Button
• Drive RGB colour wheel to the right: Press right button briefly, release and then hold down
• Drive RGB color wheel to the left: Press left button briefly, release and then hold down
• Reset RGB colour wheel to start value (red): Press left or right button twice
• RGB colour run: Press right button briefly, release and then hold down and shortly press the middle button
• Saturation up: Briefly press top button, release and then hold down
• Saturation down: Briefly press bottom button, release and then hold down

1. Channel buttons/LEDs
2. Scene buttons

• 6 channels, selectable with channel selection buttons top left and right
• Display of the currently active channel when the Remote Control is moved
• 3 individually adjustable scene buttons, by default assigned with presets 1 to 3
• Status LED (LED 1, top left)

1. Open battery compartment
2. Reset button

• Reset button on back (please open battery compartment) This function assignment is identical to the operation of the control buttons of the furniture switch and the Eco Remote Control (Note: the last two mentioned may support different or fewer functions)

For details on LED status or reset procedure, please refer to the corresponding help sections.