Remote Control

The remote control is a battery operated device that serves to control any Connect Mesh devices. It offers 6 selectable channels, each of which can control a separate group. In addition, there are 3 freely assignable scene buttons. This device supports the following functions:

Remote controls 1: On/Off 2: Temperature/Color 3: Brightness/Saturation

Switch on/off (press middle button briefly: On, hold middle button: Off)
Dim up/down (hold top or bottom button)
Minimum brightness: Short press on lower button
Maximum brightness: Short press on upper button
Colour temperature up/down (Hold left button: Colour temperature down, Right button hold: Colour temperature up)
Minimum Colour Temperature: Short Press on Left Button
Maximum Colour Temperature: Short Press on Right Button
Drive RGB colour wheel to the right: Press right button briefly, release and then hold down
Drive RGB color wheel to the left: Press left button briefly, release and then hold down
Reset RGB colour wheel to start value (red): Press left or right button twice
RGB colour run: Press right button briefly, release and then hold down and shortly press the middle button
Saturation up: Briefly press top button, release and then hold down
Saturation down: Briefly press bottom button, release and then hold down

Channels 1: Channel buttons/LEDs 2: Scene buttons

6 channels, selectable with channel selection buttons top left and right
Display of the currently active channel when the remote control is moved
3 individually adjustable scene buttons, by default assigned with presets 1 to 3
Status LED (LED 1, top left)

Mesh box 6 ports 1: Open battery compartment 2: Reset button

Reset button on back (please open battery compartment) This function assignment is identical to the operation of the control buttons of the furniture switch and the Eco remote control (Note: the last two mentioned may support different or fewer functions)

For details on LED status or reset procedure, please refer to the corresponding help sections.