Skip to main content

Eco Remote Control

The Eco remote control is a battery operated device which is used to control any Connect Mesh devices. It can control exactly one group. Furthermore, it is equipped with four freely-assignable scene buttons. This device supports the following functions:

  • Turn on/off (press the middle button shortly: on, hold the middle button: off)
  • Dim up/down (hold the upper or lower button)
  • Minimum brightness: brief press on lower button
  • Maximum brightness: brief press on upper button
  • Increase/Decrease color-temperature (hold the left button: decrease color-temperature, hold the right button: increase color-temperature)
  • Minimum color-temperature: brief press on left button
  • Maximum color-temperature: brief press on right button
  • Move right on the RGB color wheel: Briefly press the right button, let go, then hold it down
  • Move left on the RGB color wheel: Briefly press the left button, let go, then hold it down
  • Reset the RGB color wheel to initial value (red): press the left or right button twice
  • RGB color sequence: Press the right button briefly, let go, then hold it down and briefly press the middle button
  • Increase saturation: Briefly press the upper button, let go, then hold it down
  • Decrease saturation: Briefly press the lower button, let go, then hold it down
  • 4 individually assignable scene buttons, by default assigned with presets 1 to 4
  • Status-LED
  • Reset button on the back (please open battery compartment) The function assignment is identical with the operation of the control buttons of the furniture switch as well as the remote control (note: the latter two may support different or less/more functions)

For details on the LED status or the reset process, please look in the help sections of the same name.

Note: Before upgrading to firmware version 5.0, the current scene buttons 1 to 4 were used as channel selection buttons.